Adjust

ADJUST THE LENS
FOGCITY® START / FOGCITY® GO LENS

 

Remove the lens as described here, and increase or decrease tension on the lens by adjusting the eccentric studs.

  1. Take off the visor from the helmet according to the user manual
  2. Stretch the visor by slightly bending it, place the FogCity® lens between the studs, and let the visor bend back in its original position.
  3. Check if the seal of the lens touches the visor all around the lens. If this is not the case, make sure to adjust the studs (see “adjustment” below).
  4. Take off the protective foil and put the visor back on the helmet according to the user manual.
  5. Ride fog free!

ADJUST THE LENS

FOGCITY® EASY LENS

 

Due to the adhesive seal the FogCity® Easy lens cannot be adjusted.