Clean
FOGCITY® EASY | ADHESIVE SEAL
For visors without studs
Step 1
Take off the visor from the helmet according to the user manual.
Step 2
Only clean the FogCity® Easy adhesive visor insert and the visor using mild liquid, lukewarm water, and a soft, moist cloth. Allow the visor insert and the visor to dry naturally before reassembling them onto the helmet.
DO NOT USE ABRASIVE CLEANING PRODUCTS OR LIQUIDS CONTAINING WAX, AMMONIA OR ALCOHOL.
FOGCITY® START | PRESSED SEAL
For visors with FogCity® studs
Step 1
Remove the lens as described here.
Step 2
Carefully clean the lens using mild liquid soap, lukewarm water, and a soft moist cloth. Do not apply heavy force.
Step 3
Allow the FogCity® lens and the visor to naturally dry separately before reassembling them.
DO NOT USE ABRASIVE CLEANING PRODUCTS OR LIQUIDS CONTAINING WAX, AMMONIA OR ALCOHOL.
FOGCITY® GO | FLEXIBLE SEAL
For visors with FogCity® studs
Step 1
Remove the lens as described here.
Step 2
Carefully clean the lens using mild liquid soap, lukewarm water, and a soft moist cloth. Do not apply heavy force.
Step 3
Allow the FogCity® lens and the visor to naturally dry separately before reassembling them.
DO NOT USE ABRASIVE CLEANING PRODUCTS OR LIQUIDS CONTAINING WAX, AMMONIA OR ALCOHOL.
Other support pages
Install
Remove
